Further examination of my suspension revealed that the
rear-left shock had broken the spring perch, the rear right had broken the
shock mount off the chassis, and one of the front left shocks was leaking. All this, gentle reader, after having spent a
bunch of cash having all six Ohlins rebuilt after the DC. They are 5 years old and having been rebuilt
twice, they now seem to have lost their Mojo. The good news is that every failure is an upgrade opportunity!
The problem with suspension is that everyone you speak to
has their own opinion of what constitutes the ideal system. What they all agree on is that your choice
is only limited by the thickness of your wad.
The FIA allows a maximum wheel travel of 300mm all round for T1, so it
would be nice to achieve as much of this as possible. However, then you get into the realms of
radically changing the suspension geometry, which in turn affects drive shaft
angles, exhaust location etc. This
results in ever-increasing cost, complexity and risk. Then we have the discussion about how many
shocks we need, what size, what make, standard vs coilover vs bypass…the
choices are endless. What does seem
clear is that the single shocks at the rear have not proven to be man enough
for the job.
Finally I decided to avoid radical changes to the suspension
geometry, but to go with twin Radflo 2.5” shocks all round. Each corner will now have one standard
remote-can adjustable shock, plus one by-pass shock. The advantage of the by-pass shock is that
the damping is position-sensitive – in other words the damping increases in
stages as the shock approaches the limit of its travel. Robbie - chief fabricator and suspension guru at Saluki Motorsport - assures me that this will transform the handing of the Beast.
Whilst the standard shocks could be a drop-in replacement
for the Ohlins, the by-pass shocks need more space – especially at the rear,
where they will protrude through the floor.
So Robbie is fabricating a new set of mountings, and the shocks should
be shipped at the end of this week.
Meanwhile, the new fuel-cell, fabricated by my new friends
at MERIN in Italy, has arrived and will also be installed shortly. A pair of funky new Corbeau carbon-fibre
seats are also winging their way towards Dubai, leaving only a new set of
harnesses to be ordered.
Over in Jeddah, a new
rally is being organised to take place at the end of January. Tempting though this is, it would mean
missing two events here in UAE – the 3rd EMSF rally and the 2nd Motorplex Solo
Race on consecutive weekends. And since
the Jeddah rally only consists of two stages totaling 150km, it seems a lot of
hassle to go there for such little benefit.
So reluctantly, I’m giving Jeddah
a miss.
Back to UAE events, and I can advise that the dates I had
given earlier for the Desert Challenge are WRONG. The correct dates are April 3rd –
10th, the prologue being on 5th.
I’m around for the first Solo Race at the Motorplex on 21st
December – so I’m hoping against hope that the shocks will be installed in time
for this. Watch this space!